The Difference Between Stainless Steel Plate And Aluminum Alloy

The Difference Between Stainless Steel Plate And Aluminum Alloy

The difference between stainless steel plate and aluminum alloy is as follows:

1. In terms of price, stainless steel is expensive and aluminum alloy is cheap.

2. The hardness of stainless steel is higher than that of aluminum alloy.

3. Surface treatment is rich in aluminum alloy and less in stainless steel, such as electrophoresis, spraying, anodizing.

4. The aluminum alloy with poor surface treatment will oxidize after prolonged contact and may cause scars. Stainless steel is relatively good, but its composition does not meet the standards or is unintentionally rusted.

5. There are many bad stainless steel manufacturers, they mainly cut corners in terms of material thickness and composition.

The value of finished stainless steel products is higher, depending on the material: 410, 409, 443, 430, etc. are cheap stainless steel 201, 202, other service life is more common, 304, 316 are more expensive, and many materials. See what you use in this area. The density of aluminum alloy is about 2700kg/mm3, so the density of stainless steel is 7900kg/mm3. The hardness of stainless steel is higher than that of aluminum alloy, and stainless steel is much more expensive, but in general, stainless steel is much more expensive than aluminum alloy.